Please check if the SD card is recognized at all: run the following commands and post the result in a reply, Code: lsusb sudo parted -ls sudo lsblk -o MODEL,NAME,FSTYPE,LABEL,MOUNTPOINT,SIZE. It should be recognized as a mass storage device, /dev/sdx, where x is the drive letter. In that case you should be able to mount it, even if it is no Once connected, you can transfer the data from the device to the computer without using the SD card in your computer. Skip to checking the USB adapters to start troubleshooting and finding a more permanent solution. If the SD card does not work with your device (e.g., camera) and isn't recognized by your computer, the SD card may be bad. Solution 3: Confirm SD card lock status and assess for damage. If the SD card has a physical lock switch, ensure it is not in the locked position. If the SD card is damaged, it may not be recognized by the Mac. In this instance, professional repair or replacement may be necessary. Solution 4: Test SD card reader functionality Turn on your Switch, and select “System Settings” on the Home menu. 2. And scroll down the System Settings menu to choose “System”, and choose “System Update”. 3. Then it will check if there is a new system update, and start to download the system automatically. Method 3. Format the SD card on a PC. A wrong file system could cause a Open Format in the SD Card Properties on the PC. Change the file system to FAT32 (default) and uncheck ‘ Quick Format .’. Click on Start and select OK. Set the File System to FAT32 (Default), Uncheck Quick Format, and Click on Start. Wait until the process is complete, and once it’s done, remove the card from the PC. Outdate driver can be the reason for PNY SD card not showing up in Windows as well. If so, do as follow: 1. Press Windows + R to open Run window at the same time, type devmgmt.msc, and hit Enter key. 2. Expand disk drive, right-click PNY SD card device, and select Update Driver Software among the given list. 3. eGZI. Run CHKDSK to fix corrupt files. Press the Win + R keys to open the Run dialogue. Type the below command and press Enter. cmd. Execute the below command. chkdsk C: /f /r /x. Make sure to replace /x with the drive letter of your SD card. Close command prompt. Restart your PC. 1. Right click on the Start icon and select Device Manager. 2. Find your micro SD card and right click on it. >> If it shows “Disable”, then you have already enabled SD card reader and there is nothing to do. >> If not, select the option “ Enable ”. Then, Windows 10 could detect your micro SD card normally. Recommendations: Go to SD manufacturer's site, search for init/check/partitioning tool for your SD (if not available, find some chip detecting third-party tool which claims the work with SunDisk SDs, detect controller and memory chips models, then search for third-party init/check/partitioning tool for detected models) and try to re-init your SD. 2.1 Manual update. Right-click on the Start menu and select Device Manager. Look for any driver group with a yellow exclamation, expand it, right-click on the driver, and select Update driver. Select Search automatically for drivers. Right-click on the driver setup file and select Properties. Press Windows + X and click Device Manager to start. Step 2. Right-click Samsung SSD 860 EVO and choose Update driver. Step 3. Restart your system. 2. Samsung SSD Not Showing Up in Disk Management. If the Samsung SSD is not showing up in disk management, you can restart your computer first and then access BIOS. Galaxy Note10+ not detecting SD card fix #9: Reset all settings. Resetting all settings is like a semi factory reset. It returns all software settings to their defaults but without actually

huawei sd card not detected